10mm Drill Bit Guide
New updated guide for drilling into the edge of doors or carcasses. Two 10mm holes are set for drilling in the centre of 16 or 18mm board. Choose the 18mm side if over 18mm thick. Easy to to use, simply clamp the guide onto the door or carcass and drill as normal. Check video.
- Should be clamped to the inside of the door.
- 10mm drill bit guide suitable for LD1400 or LD1401 cylindrical reed switches and magnets
- Both reed switches and magnets are 9.5mm in diameter and the flange on our LD1401 is 11mm