LD1010
Door or Motion Activated
Complete Kit
Plug & Play

Door or Motion Activated Tri-colour Pantry Light Kit

Pantry light kit with a choice between door or motion activation. This kit is suitable for a single or two door walk-in pantry/laundry with a selection switch on the light for your preferred colour temperature ranging from warm white to cool white to daylight.

Technical

• Supplied fully connected, ready to install, just plug and play.
• Select the reed switch best suited to your application or select the miniature PIR motion sensor.
• Tri-colour downlight. Select your preference using the built-in switch – 3000K, 4000K or 5000K
• Can be supplied with downlight and controller only where there are existing reed switches. Select “Nil” doors.
• Time delays from 30s to 30m to infinity are available for door activated switching. Timer will automatically switch off the light if a door is left open, or, if set to infinity will leave the light on until all the doors are closed. For the PIR motion sensor the timer will turn off the light at settings up to 30m after the last motion was detected.
• Installation instructions for the magnets and reed switch can be found here or click the Brochure tab.

Includes

• 240V, 10W tri-colour downlight – select colour temp with switch on fitting
• 240V AC controller – LD2000-A (for reed switches) or LD2000-P (for PIR sensors)
• Reed switch/es or PIR motion sensor/s

PIR sensor

Available in black or white with matching lens colour
Cable: 2m
Range: 2-3m
Dimensions: face 20mm dia., body 14mm dia., recessed length 40mm

Downlight

Type: Recessed
Colour Temperature: Select with switch – 3000K (warm white), 4000K (cool white), 5000K (daylight)
Colour: White body
Material: Polyamide with heat dissipation LED
Overall Diameter: 110mm
Cut Out: 90mm
Height: 55mm
Flex & Plug: 1.2m cable
Diffuser: Acrylic
Input Voltage: 240V
Power: 10W
Luminous Flux: 900lm
Life: 20,000 hours
Warranty: 3 years