LD1432
Touch Sensor
Surface Mount

Touch Sensor

For use with Lightdream controllers LD2052 for 12/24V and LD2000-T for 240V. Touch sensor to turn on, touch again to turn off or allow the controller’s timer to turn off automatically. For the LD2052, the touch sensor can be used to increase or decrease the light level.

Technical

• Touch sensor: 28*15*6mm. Available in black, white, light brown and dark brown and supplied with 2m extension cable.
• AC controller can be configured for a single load or two individual loads using the DIP switch to select between single channel or two channel. A maximum of four touch sensors can be connected to each controller. Connect up to two per channel or up to four on a single channel
• Use DIP switches to set time delay.
• 500W maximum load across both channels
• DC controller has fade-in/fade-out, timers and can set the light level at a preferred level.

Specifications

LD2000-T
Input/Output: 240VAC
Power Outputs: 2
Channels: 1 or 2 (select)
Maximum Load (total): 500W
Switching Method: Solid-State
Sensor Inputs: 4
Timer settings (8): 10s, 30s, 1m, 5m, 10m, 15m, 30m, infinity
AC Controller Dimensions: Height: 35mm, Width: 56mm, Length: 153mm
Touch sensor cable hole for plug 10mm dia.

Certification

EMCAS/NZS CISPR14.1:2010
Electrical SafetyAS/NZS 61558; AS/NZS 3820:2009
FlammabilityABS AF312C-NP 94VO