9.7mm Drill Bit Guide
Drill guide designed for accurately installing the Lightdream LD1401 Reed Switch vertically through the top panel of a cabinet carcass. When used with the 9.7mm drill bit (LD1739), the guide helps produce a clean, chip-fee hole that allowing the LD1401 reed switch to push in neatly and remain firmly secured by its retaining fins.
Simply clamp the guide securely to the carcass and drill vertically through the guide hole. When clamped tightly, the guide helps to eliminate chipping and produces a clean professional finish.
Includes
- 1 x 9.7mm drill bit guide
Required
- 9.7mm drill bit – LD1739
- G-clamp
Features
- Designed specifically for the Lightdream LD1401 Reed Switch
- Positions the 9.7mm hole approximately 30mm from the front edge of the carcass
- Ensures correct positioning within operating range of Lightdream magnets
- Helps achieve clean, straight, repeatable holes
- Ideal for retrofitting into existing cabinets
| Weight | 42 g |
|---|