LD2046
12/24V DC Controller
Use with PIR Sensors
0 – 100% Dimming
Fade-in/out, Timer

DC Controller For Up To Two PIR Sensors With Dimming

• Connect up to 2 x PIR motion sensors – LD1412, LD1413
• If light is too bright you can dim the light level with the on-board potentiometer for a set-and-forget setting
• approximately 2-3 sec fade-in/fade-out
• Four timer settings using on-board DIP switches
• Timer will restart each time motion is detected.
• Multiple uses – pantries, wardrobes, laundries, vanities, bathrooms, walk-in-robes

For use with Lightdream miniature motion sensor LD1412 or LD1413. Up to two PIR sensors can be connected. Settings available for 0 – 100% dimming and time delay. Timer will restart each time motion is detected. Fade-in/fade-out is preset.

Add-ons include

• 2m extension cables for the PIR sensors LD1565
• Splitter cables to allow multiple controllers to connect to a single DC power source LD1562

Technical

• Dimming from 0 – 100%.
• Fade-in/fade-out fixed at a few seconds.
• Timer settings: 5s, 1m, 2m, 5m (use 5s setting for testing)
• Input power can be either from a power adapter using the plug socket
  OR
  hardwire directly from a 12V or 24V LED Driver using the terminals marked INPUT.
• Input/Output Power: 12/24VDC @ 5A, maximum LED load 60W @ 12V or 120W @ 24V.
• For use in conjunction with Lightdream PIR sensors, LD1412.

LD2045