LD2050
12/24V DC Controller.
Use with PIR & LUX Sensors.
Fade-in/out, Dimmer, Time Delay.

12/24V Controller For Use With PIR & LUX Sensors

Features

• For use with LD1412 (wide angle) or LD1413 (narrow angle) PIR sensors, LD1414 LUX sensor and LD1415 combined PIR & LUX sensor.
• On-board potentiometer to set light level to required brightness, 0 – 100%.
• Four timer settings using on-board DIP switches – 15s, 30s, 1m, 2m.
• Timer will restart each time motion is detected.
• Fade-in/fade-out over 4 seconds.
• Ideal for under‑vanity, bedside tables, hallways, stairs—anywhere short‑duration, low‑level lighting is desired.

Technical

• Installation Instructions
• Variable dimmer for 0 – 100%
• Timer settings: 15s, 30s, 1m, 2m
• If using LD1415 or LD1414 avoid installations where shadowing may occur
• 2m extension cables available for PIR sensors LD1565
• Input power can be either from a power adapter using the plug socket
  OR
  hardwire directly from a 12V or 24V LED Driver using the terminals marked INPUT.
• Input/Output Power: 12/24VDC @ 5A, maximum LED load 60W @ 12V or 120W @ 24V.
• For use with Lightdream PIR & LUX sensors, LD1412, LD1413, LD1414, LD1415

LD2050