LD2080
Wireless Door Switch
Transmitter

Door activated wireless control for LED lighting

Quick to install, this wireless door switch system can be used on a single or two door cabinet.

On a single door cabinet fix the transmitter to the carcass and the magnet to the door.

For a two door cabinet the transmitter is fixed to the inside surface of one door and the magnet is fixed within 35mm to the inside surface of the other door. Fixing is by peel ‘n’ stick 3M pads.

On the controller set the time delay to 1 minute. After closing the doors the light will remain on till the timer times out.

System can be one transmitter to one receiver or one-to-many, many-to-one or many-to-many. This means you can have one transmitter controlling any number of receivers or have any number of transmitters controlling a single receiver.

INCLUDES
1 x transmitter & magnet

REQUIRED
*  2 x CR2032 lithium coin batteries
*  1 x LD2083 Wireless Receiver Dongle
*  1 x Controller of the following:
– LD2045 12/24VDC controller
– LD2046 12/24VDC controller
– LD2000-P 240VAC controller

FEATURES
Range: up to 30m line-of-sight.
Over 1,000,000 unique codes.
Zero power consumption when the doors are closed.
Battery life: 5 -10 years depending on use.

INSTALLATION INSTRUCTIONS

SPECIFICATIONS
Transmitter: 80mm (L) * 30mm (W) * 10.5mm (H)
Magnet: 28mm (L) * 15mm (W) * 6mm (H)
Batteries: 2 x CR2032 (not included)
Range: 30m line-of-sight
Frequency: 430MHz