DC controller with 0-100% dimming capability + fade-in/fade-out + timer.
For use with Lightdream’s range of reed switches.
Designed for door activated lighting where the interior light requires setting to a more comfortable level with use of the onboard potentiometer. Fade-in/fade-out is preset. Includes a timer to switch off the light if a door is left open. For use with 12/24V LED strip lighting in conjunction with Lightdream reed switches – LD1400, LD1401, LD1402, LD1403 or LD1416. Integrates with 3rd party LED strip lights and drivers.
Basic system
Connect power from either a power adapter or an LED driver.
Expanding the system
Add-ons include
- 2/4m extension cables for the reed switches LD1563,
- Splitter cables to allow multiple controllers connected to a single DC power source LD1562
- 6 port expansion dongle when there are more than four doors LD1420.
- Can also add on additional controllers to the one power supply as well as additional LED lights in parallel with the output.
Application Sheet
Technical
- Set the reed switches 1/3 the distance from the hinge side to early activate the fade-out.
- To dim the light level, remove the connection cover and turn the dial to the desired level.
- Fade-in/fade-out is preset to approx 3 seconds
- Timer settings: 5m, 15m, 30m, infinity.
- Input power can be either from a power adapter using the plug socket
OR
hardwired directly from a 12V or 24V LED Driver using the terminals marked INPUT. - Input/Output Power: 12/24VDC @ 5A, maximum LED load 60W @ 12V or 120W @ 24V.
- For use in conjunction with LD1400, LD1401, LD1402, LD1403 or LD1416 reed switches.
- Connect up to four reed switches to control a single LED fixture. Open any door light on, close all doors light off.
- Additional reed switches can be added by using the 6 port expansion module LD1420.
- All inputs are connected in series. Break the series loop and the controller switches on. Reed switch contacts are closed with a magnet present.
-
LD2041
Input/Output Voltage 12/24VDC Max Load @ 12V 60W Max Load @ 24V 120W Max Current 5A Switch Method solid-state Reed Switch Inputs 4 Dimensions 39x65x22mm Warranty 5 years