Dual Reed Switch & Magnet Kit For Two-Door Joinery Lighting
The LD1416 reed switch and magnet kit is designed specifically for two-door joinery installations where a single 2-wire (figure-8) cable has been pre-wired into the top of the cabinet. It features two reed switches — one for each door — housed in a compact enclosure for easy, central mounting.
The unit is placed over the figure-8 cable and stuck in place with peel & stick 3M pads. The cable is soldered directly to the two terminal tabs inside the unit, after which the cover is snapped on for a tidy finish. Supplied with two dome magnets, which are attached to each door with peel & stick 3M pads as well.
A short cable with a plug is included to be connected to the other end of the figure 8 cable to allow it to be plugged into a Lightdream controller which then switches the power from the LED driver to the LED strip as the cabinet doors are opened and closed.
Features
- Single unit for two doors – for connection to a single, two wire cable
- Surface mounted – with peel & stick 3M pads
- Silent operation – no clicks or mechanical noise
- Wide working gap – up to 20 mm
- Unaffected by door warp
- Premium quality – rated for over 10 million operations
- Open any door, light on, close all doors, light off
- Lifetime warranty
Includes
- 1 x dual reed switch in various colours
- 1 x 100 mm controller connection cable & plug
- 2 x dome magnets
Required
Choose one controller
Accessories
- Hand held reed switch test tool – test without connecting up the driver, controller and LED strip – LD1430
Technical Details
-
Dual reed switch mounts to the cabinet carcass using a peel-and-stick 3M adhesive pad.
-
Incoming two-wire cable is soldered to the reed switch unit.
-
The opposite end of the cable is soldered to the supplied 100 mm connection lead, which plugs directly into the controller.
-
Magnet attaches to the cabinet door with a peel-and-stick 3M adhesive pad (as shown in diagram).
- Compatible controllers: For 240 VAC – LD2000-A. | For 12/24 VDC – LD2040, LD2041, LD2042, LD2048.
Correct Positioning Of Parts
Resources
Specifications
Operating Gap: 0 – 20 mm
Reed Switch
Dimensions: 63 x 17 x 7 mm
Supplied with a separate 100 mm long cable with plug for connection to controller
Plug: 2 pole, non-polarized
Operations: >10,000,000
Warranty: Lifetime
Magnets
Dimensions: Ø16 x 6 mm
Type: NdFeB
Lifespan: 10,000 years
Warranty: Lifetime
| Weight | 28 g |
|---|---|
| Dual reed switch colour | white, black, dark grey |
| Magnet colour | white, black, light brown, dark brown, light grey, dark grey |