LD2040
12/24V DC Controller
For Reed Switches
Function: on/off

DC Controller for use with Lightdream’s range of Reed Switches

Designed for switching power to 12/24V LED lighting in conjunction with Lightdream reed switches. The controller acts as a central hub connecting cables from the reed switches, the power supply and the LED fixture at a single point. Reed switches can be any of the following – LD1400, LD1401 or LD1402.

Compact and designed with reed switch inputs on one side with the power connections on the other side. Allows insertion through a 50mm access hole. Integrates with other supplier’s LED lights and drivers.

Basic System

CONNECT POWER WITH EITHER A POWER ADAPTER OR A LED DRIVER</font color>

Expanding the System

Add-ons include 2/4m extension cables for the reed switches LD1563, splitter cables for multiple DC controllers LD1562 and 6 port expansion cards when there are more than four doors LD1420. Other add-ons include power supplies and LED strips can be found here.

Application Sheet

Technical

• Installation Instructions
• Input power can be connected either by
  plugging in directly from a DC Power Adapter such as LD1610 or LD1611
  OR
  hardwire directly from a 12V or 24V LED Driver such as LD1605 to the screw terminals marked INPUT.
• Input/Output Power: 12/24VDC @ 5A, maximum LED load 60W @ 12V or 120W @ 24V.
• For use in conjunction with P/N LD1400, LD1401, or LD1402 reed switches.
• Brochure with 11 configuration examples for the reed switches & magnets.
• Connects up to four reed switches to control a single LED fixture. Open any door light on, close all doors light off.
• Additional reed switches can be added by using the 6 port extension card LD1420.
• All inputs are connected in series. Break the series loop and the controller switches on. Reed switch contacts are closed with a magnet present.

LD2040